Fiche technique
Ce site utilise des cookies afin que nous puissions vous offrir la meilleure expérience utilisateur possible. Les informations sur les cookies sont stockées dans votre navigateur et remplissent des fonctions telles que vous reconnaître lorsque vous revenez sur notre site Web ou aider notre équipe à comprendre quelles sections du site Web vous trouvez les plus intéressantes et utiles.
Sold out
Isooctane Pesticide Grade PGR
C8H18
M.W: 114.23 CAS: 540-84-1 EC: 208-759-1 EC INDEX: 601-009-00-8
UN: 1262 IMDG: 3 II UN 1262 ADR: 3 II UN 1262 (D/E) IATA: 3 II UN 1262 P: P301+P310 
SHOW SPECIFICATIONS
- Sterilization cycle 550 – 0
- Assay ≥ 99.9%
- Assay (C8H18) ≥ 99%
- Assay (V/V) ≥ 96%
- Minimum calorimetry dose 15 – 18.8kGy
- Appearance Conforms
- Assay (dried substance) ≥ 99.0%
- Clarity of solution Passes test
- Density 0.789 – 0.791g/ml
- Density at 20°C 0.844 – 0.854g/cm 3
- Free acidity ≤ 0.04meq/g
- Sodium carbonate (Na2CO3) ≤ 0.5%
- Substances not precipited by diluted H2SO4 ≤ 0.1%
- Water (H2O) by Karl – Fischer ≤ 0.02%
- Colour (Hazen) ≤ 10
- Composition 70% isopropyl alcohol, water%
- Iron (Fe) ≤ 0.01%
- Identification A Conforms
- Substances insoluble in water (H2O) ≤ 0.003%
- Odour alcohol
- Min. dose ≥ 25kGy
- Boiling point ≥ 78ºC
- Acidity ≤ 0.0010%
- Appearance of solution Clear and colourness
- Chloride (Cl–) ≤ 0.0001%
- Silver (Ag) ≥ 63.4%
- Solubility in water (H2O) Completely soluble
- Solubility in water (H2O) (20°C) Totally soluble
- Sodium sulfate (Na2SO4) ≤ 0.012%
- Aldehydes ≤ 0.001%
- Arsenic (As) ≤ 0.0001%
- Residue on roasting (SO4) ≤ 0.05%
- Flash point ≥ 21
- pH 3.8 – 6
- pH (10%; water) 3 – 5
- Residue on evaporation ≤ 0.0005%
- Chlorate (ClO3–) and Perchlorate (ClO4–) (Cl) ≤ 0.006%
- Copper (Cu) ≤ 0.0001%
- Water (H2O) ≤ 0.05%
- Methanol (CH3OH) ≤ 0.001%
- Manganese (Mn) ≤ 0.00005%
- Sodium chloride (NaCl) ≤ 0.01%
- Ammonium (NH4) ≤ 0.2%
- Mercury (Hg) ≤ 0.00001%
- Phosphate (PO4) ≤ 0.002%
- Residue on ignition ≤ 0.05%
- Heavy metals (Pb) ≤ 0.002%
- Nickel (Ni) ≤ 0.001%
- Sulfates (SO4) ≤ 0.01%
- Absence of benzene passes test
- Esters ≤ 0.0020%
- Organic substances passes test
- Loss on drying ≤ 0.2%
- Calcium (Ca) ≤ 0.004%
- Higher alcohols ≤ 0.025%
- Iron III (Fe (III)) ≤ 0.001%
- Nitrites (NO2) ≤ 0.0002%
- UV-Absorbance Maximum limit (240 nm) ≤ 0.4
- Magnesium (Mg) ≤ 0.003%
- Lead (Pb) ≤ 0.0002%
- UV-Absorbance Maximum limit (240 nm) ≤ 0.4
- UV-Absorbance Maximum limit (250-260 nm) ≤ 0.3
- UV-Absorbance Maximum limit (270-340 nm) ≤ 0.1
- Substances not precipited by HCl ≤ 0.01%
Disponible à la fois au format standard et au format "pack économie''
Peut requérir une déclaration d’utilisation selon pays 
Now go add some variable products!
Description
C8H18
M.W: 114.23 CAS: 540-84-1 EC: 208-759-1 EC INDEX: 601-009-00-8
UN: 1262 IMDG: 3 II UN 1262 ADR: 3 II UN 1262 (D/E) IATA: 3 II UN 1262 P: P301+P310
SHOW SPECIFICATIONS
- Sterilization cycle 550 – 0
- Assay ≥ 99.9%
- Assay (C8H18) ≥ 99%
- Assay (V/V) ≥ 96%
- Minimum calorimetry dose 15 – 18.8kGy
- Appearance Conforms
- Assay (dried substance) ≥ 99.0%
- Clarity of solution Passes test
- Density 0.789 – 0.791g/ml
- Density at 20°C 0.844 – 0.854g/cm 3
- Free acidity ≤ 0.04meq/g
- Sodium carbonate (Na2CO3) ≤ 0.5%
- Substances not precipited by diluted H2SO4 ≤ 0.1%
- Water (H2O) by Karl – Fischer ≤ 0.02%
- Colour (Hazen) ≤ 10
- Composition 70% isopropyl alcohol, water%
- Iron (Fe) ≤ 0.01%
- Identification A Conforms
- Substances insoluble in water (H2O) ≤ 0.003%
- Odour alcohol
- Min. dose ≥ 25kGy
- Boiling point ≥ 78ºC
- Acidity ≤ 0.0010%
- Appearance of solution Clear and colourness
- Chloride (Cl–) ≤ 0.0001%
- Silver (Ag) ≥ 63.4%
- Solubility in water (H2O) Completely soluble
- Solubility in water (H2O) (20°C) Totally soluble
- Sodium sulfate (Na2SO4) ≤ 0.012%
- Aldehydes ≤ 0.001%
- Arsenic (As) ≤ 0.0001%
- Residue on roasting (SO4) ≤ 0.05%
- Flash point ≥ 21
- pH 3.8 – 6
- pH (10%; water) 3 – 5
- Residue on evaporation ≤ 0.0005%
- Chlorate (ClO3–) and Perchlorate (ClO4–) (Cl) ≤ 0.006%
- Copper (Cu) ≤ 0.0001%
- Water (H2O) ≤ 0.05%
- Methanol (CH3OH) ≤ 0.001%
- Manganese (Mn) ≤ 0.00005%
- Sodium chloride (NaCl) ≤ 0.01%
- Ammonium (NH4) ≤ 0.2%
- Mercury (Hg) ≤ 0.00001%
- Phosphate (PO4) ≤ 0.002%
- Residue on ignition ≤ 0.05%
- Heavy metals (Pb) ≤ 0.002%
- Nickel (Ni) ≤ 0.001%
- Sulfates (SO4) ≤ 0.01%
- Absence of benzene passes test
- Esters ≤ 0.0020%
- Organic substances passes test
- Loss on drying ≤ 0.2%
- Calcium (Ca) ≤ 0.004%
- Higher alcohols ≤ 0.025%
- Iron III (Fe (III)) ≤ 0.001%
- Nitrites (NO2) ≤ 0.0002%
- UV-Absorbance Maximum limit (240 nm) ≤ 0.4
- Magnesium (Mg) ≤ 0.003%
- Lead (Pb) ≤ 0.0002%
- UV-Absorbance Maximum limit (240 nm) ≤ 0.4
- UV-Absorbance Maximum limit (250-260 nm) ≤ 0.3
- UV-Absorbance Maximum limit (270-340 nm) ≤ 0.1
- Substances not precipited by HCl ≤ 0.01%